LG LMVM2277ST Installation Instructions Manual page 15

For Wall-Vented
• Make the box cutout for the rear wall duct.
Use the wall template to determine the location and size of the
box cutout for the rear wall duct.
• Attach the exhaust adapter to the rear plate. See Figure 30.
Push in securely until it is past the top locking tabs and in the
lower locking tabs. Take care to assure the damper hinge is
installed so that it is at the top and that the damper swings
freely.
• Carefully guide the exhaust adapter, now attached to the rear
plate, into the house duct. Before using the screws to attach the
plate to the wall, this will assure proper alignment for
installation.
• Return to step 5, item 3 to continue. After completing the
installation of the mounting plate, again check the rear damper
for free movement to assure it will operate properly.
II
%
m
Figure 29
Figure 30
-15-