Panasonic CT-32HXC43 Manual page 19

REMOTE CONTROL OPERA TtON (MODELS
CTo32HL43 AND CTo36HL43)
Programming the Remote Programming without a Code
The Universal Remote Control can be programmed to
operate many manufacturers' components, using the
component function buttons for VCR, DVD, AUX, RCVR,
TV, DTV CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.
Default Modes for Remote Control
TM TV (Panasonic Only) Panasonic TV Code
DTV-STB DTV (Panasonic Only) Panasonic DBS Code
:ABLE CABLE(Preset)
Panasonic CABLE
Code
DBS DBS (Preset) Panasonic DBS Code
MCR VCR (Preset0 Panasonic VCR Codes
DVD/CD DVD and CD (Preset) Panasonic DVD Codes
Personal Video Recorders, Panasonic Personal
AUX
Tape and VCR2 Video Recorder Code
RCVR Audio receiver (Preset) Panasonic RCVR code
Note: Determine the manufacturer of the component and look
in the table for the code,
Programming with a Code
Procedure
Confirm that the external component is plugged
and operating.
Turn the component off.
ACTION
Press and _ together, for at least 5
seconds.
Press appropriate component button on the
Remote Control VCR, DVD (CD), AUX (VCR2 or
TAPE), RCVR, DTV, CABLE or DBS.
Enter the 3-digit component code using the
Remote Control numeric keypad (O ~ 9 buttons).
Press the Remote Control _) to test the
component. If the procedure was successful, the
component will turnon.
Note: If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or If the procedure takes longer than 30
seconds, the programming will fail.
This procedure searches all codes and is called the
"sequence method."
Procedure
Confirm that the external component is plugged in
and on.
Turn the component off.
ACTION
Press and (_ together, for at least 5
seconds.
Press appropriate component button on the
Remote Control.
Press VOL • to move forward to the next code.
Press< VOL to move backward.
Press the Remote Control _) to test the
component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is
found, it may take many attempts before the correct
code is found.
Component
Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all the features found in each
model.
VGR
AUX(VCR2)
CABLE
DVD
AUX(TAPE)
DBS
DVD(CD)
RECEIVER
AUXlPVR)
17e