Nikon COOLPIX L120 User Manual page 5

L_ Observe caution when
handling the battery
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
• Before replacing the battery, turn the
product off. If you are using the AC
adapter, be sure it is unplugged.
• Use only the batteries approved for
use in this product (_ 14). Do not
combine old and new batteries or
batteries of different makes or types.
• When charging Nikon EN-MH2
rechargeable Ni-MH batteries, use
only the specified charger and
charge the batteries four at a time.
When replacing the batteries with
EN-MH2-B2 batteries (available
separately), purchase two sets (total
of four batteries).
• The EN-MH2 rechargeable batteries
are for use with Nikon digital cameras
only, and are compatible with
COOLPIX L120.
• Insert batteries in tile correct
orientation.
• Do not short or disassemble tile
battery or attempt to remove or
break tile battery insulation or casing.
• Do not expose tile battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Do not transport or store with metal
objects such as necklaces or hairpins.
• Batteries are prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• Discontinue use immediately should
you nodce any change in the battery,
such as discoloration or deformation.
• If liquid from the damaged battery
comes in contact with clothing or skin,
rinse immediately with plenty of water.
Z_ Observe the following
precautionswhen handling the
Battery Chargers (available
separately)
• Keep Dry. Failure to ()[)serve this
precaution could result in fire or
electric shock.
• Dust on or near the metal partsofthe
plug should be removed with a dry
cloth. Continued use could result in
fire.
• Do not handle tile power cable or go
near tile battery charger during
lightning storms. Failure to observe
this precaution could result in
electric: shock.
• Do notdamage, modify, forciblytug or
bend tile power cable, place it under
heavy objects, or expose it to heat or
flame. Should tile insulation be
damaged and tile wires become
exposed, take it to a Nikon-authorized
service representative for inspection.
Failure to observe these precautions
could result in fire or electric: shock.
• Do not handle tile plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric: shock.
• Do not use with travel converters or
adapters designed to convert from one
voltage to another or with DC-to-AC
inverters. Failure to observe this
precaution could damage the product
or result in overheating or fire.
iii