Removing
the
Battery
Turn tile camera off (_
19) and be sure that tile
power-on lamp and the monitor have turned off before
opening the battery<hamber/memory
card slot (:over.
To eject the battery, open the battery<hamberi
memory card slot cover and slide the orange battery
latch in the direction indicated by the arrow (_). The
battery (:an then be removed by hand ((2]).
• The camera, battery, or memory card may be hot
immediately after using the camera. Observe caution when removing the
battery or memory card.
_1_
Notes
on the
Battery
• Be sure to read and follow
the warnings
for the battery
on page iii and the section,
"The Battery"
(_
195), before use.
• If the battery
will not be used for an extended
period,
recharge
it at least once every six months
and run it flat before returning
it to storage,
15