Table of Contents
Advertisement
Service
7
i_ll
WARNING:
Unplug the snow thrower
and remove
the key to avoid unintended
starting
before
servicing
the snow thrower.
Replacing Skid Plate
1.
Remove the three screws securing
the skid plate to the
auger housing.
See Fig. 7-1.
/
Figure 7-1
2.
Remove the worn skid plate and replace with a factory
approved
skid plate.
3.
Secure using the three screws removed
earlier.
ReplacingAugerBelt
1.
Unscrew the six screws securing
the belt cover to the auger
housing
and remove
the belt cover. See Fig. 7-2.
/
/
/
/
//
Figure 7-2
2_
Pull the idler bracket upward to relieve tension
on the belt.
See Fig. 7-3.
CAUTION:
Do not unhook the idler extension
spring. Doing so may allow the spring to become
dislodged
and lost in the auger housing.
/
'\
/
/
/
Figure 7-3
3.
Pull the belt off Pulley B.
4.
Replace in the opposite
order.
Hide quick links:
Advertisement
Table of Contents
