Engine Operation - MTD 11A-08M5229 Operator's Manual

EngineOperation
9
Fuel Cap
\
Air Cleaner
Grip
Cap
Oil Drain
Mumer
Spark Plug
Pre-0perationCheck
0il Recommendations
NOTE:This engine is shipped without gasoline or oil in the
engine. Running the engine with insufficient oil can cause
serious engine damage and void the engine warranty.
Before starting engine, fill with oil. Do not over-fill. Oil
capacity is about 20 oz.
Use a 4-stroke, or an equivalent high detergent, premium
quality motor oil certified to meet or exceed U.S. automobile
manufacturer's requirements for service classification SG/SF.
Motor oils classified SG/SF will show this designation on the
container.
SAE 10W-30 is recommended for general, all temperature use. If
single viscosity oil is used, select the appropriate viscosity for the
average temperature in your area from the chart to the right.
Figure 10-1
_ 20w
__ 20
lllmlml Rlmmlll
,,,,30
20w40, _Ow50____mb_
I
15w40, 0______
® low4o -..--...-----
lOw30_____u
(°C)-300 -200 -I0 ° 0 ° I0 ° 200 300 400
(°F)-20o 0° 200 400 600 800 1000
Ambient Temperature
1. Single Viscosity
2. Multi Viscosity
NOTE: Using non detergent oil or 2-stroke engine oil could
shorten the engine's service life.
16