Table of Contents
Advertisement
8. Install the new drive 1 from the rear of the drive-bay assembly and slide the
Figure 14. Installing a new drive
9. Reinstall the front bezel.
Erasing a lost or forgotten password (clearing CMOS)
This section applies to lost or forgotten passwords. For more information about
lost or forgotten passwords, go to the ThinkVantage
To erase a forgotten password:
diskette-drive 1 to the locked position. See Figure 14.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Chapter 4, "Completing the parts
replacement," on page 41.
1. Open the computer cover. See "Opening the cover" on page 12.
2. Access the system board. See "Accessing system board components and
drives" on page 13.
3. Locate the Clear CMOS/Recovery jumper on the system board. See
"Identifying parts on the system board" on page 9.
4. Move the jumper from the standard position (pins 1 and 2) to the
maintenance or configure position (pins 2 and 3).
5. Reinstall the PCI-riser assembly if removed.
6. Lower the drive-bay assembly and reconnect any cables that were
disconnected.
7. Close the computer cover and connect the power cord. See Chapter 4,
"Completing the parts replacement," on page 41.
®
Productivity Center program.
Chapter 3. Installing options and replacing hardware
21
Advertisement
Table of Contents
