Table of Contents
Advertisement
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Chapter 4, "Completing the parts
replacement," on page 41.
Installing a diskette drive in bay 2
To install a diskette drive in bay 2:
1. Open the computer cover. See "Opening the cover" on page 12.
2. Remove the front bezel by releasing the three tabs as shown and pivoting the
bezel outward from the top. See Figure 12.
Figure 12. Removing the front bezel
Chapter 3. Installing options and replacing hardware
19
Advertisement
Table of Contents
