Dell Alienware Aurora R3 Service Manual page 49

Advance DRAM Configuration
Overclock Configuration
Overvoltage Configuration
Load Level 1 Defaults
Load Level 2 Defaults
Advanced — ME Subsystem
ME Version
ME subsystem
End of Post Message
Execute MEBx
Integrated Clock Chip
Configuration
Advanced — ME Subsystem — Integrated Clock Chip Configuration Submenu
ICC OverClocking Lib Version
Number of ICC Profiles:
Current ICC Profile Index:
ICC Enable
Advance DRAM Configuration Submenu
Memory-Z
Command Rate
tCL
tRCD
tRP
tRAS
tRFC
tWR
tWTR
tRRD
tRTP
tFAW
tWCL
tCKE
Overclock Configuration Submenu
Turbo Mode
Long duration power limit
Long duration maintained
Short duration power limit
1-Core Ratio Limit
2-Core Ratio Limit
3-Core Ratio Limit
4-Core Ratio Limit
VID Override for Max Turbo
Ratio
Overvoltage Configuration Submenu
DDR3 Memory Voltage
Dynamic CPU VCore Offset
Allows you to change the Advance DRAM Configuration.
Allows you to access the Overclock Configuration submenu.
Allows you to access the Overvoltage Configuration submenu.
Allows you to load Level 1 default setting.
NOTE: This setting may not be available for some processors.
Allows you to load Level 2 default setting.
NOTE: This setting may not be available for some processors.
Displays the ME version number.
Allows you to enable or disable the ME subsystem.
End of Post Message.
Allows you to enable or disable the Execute MEBx.
Allows you to access the Integrated Clock Chip Configuration submenu.
Displays the ICC OverClocking Lib Version number.
Displays the number of ICC Profiles supported on your computer.
Displays the current ICC Profile Index value.
Allows you to enable or disable the Integrated Clock Chip.
Opens submenu to display the SPD configuration for each memory module.
Displays the Command Rate (editable in Manual Mode).
Displays the Column Address Strobe Latency (editable in Manual Mode).
Displays timing of RAS to CAS delay (editable in Manual Mode).
Displays timing of RAS Precharge (editable in Manual Mode).
Displays timing of Row Address Strobe (editable in Manual Mode).
Displays timing of Refresh to Archive/Refresh cycle time (editable in Manual Mode).
Displays timing of Write Recover (editable in Manual Mode).
Displays Write to Read Delay (editable in Manual Mode).
Displays RAS to RAS delay (editable in Manual Mode).
Displays Read to Precharge Command Delay (editable in Manual Mode).
Displays the Four Activate Window (editable in Manual Mode).
Displays the Write CAS Latency (editable in Manual Mode).
Displays the Minimum CKE High and Low Pulse Width (editable in Manual Mode).
If enabled, allows processor to run at faster frequencies than marked.
Allows you to change the long duration power limit.
Allows you to change the long duration time limit.
Allows you to change the short duration power limit.
Allows you to change the ratio limit of the processor's first core.
Allows you to change the ratio limit of the processor's second core.
Allows you to change the ratio limit of the processor's third core.
Allows you to change the ratio limit of the processor's fourth core.
Allows you to change the VID override for max turbo ration value.
Adjusts the DDR3 Memory Voltage.
Allows you to change the Processor Core Voltage Offset value.