Setting Up The Monitor; Attaching The Stand - Dell U2913WM User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ U2913WM Flat Panel Monitor User's Guide

Attaching the Stand

Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar AX510 / AX510PA (Optional)
Removing the Stand
Wall Mounting (Optional)
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.
To attach the monitor stand:
1.Remove the cover and place the monitor on it.
2.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
3.Press the stand till it snaps into its place.