Electrical Specifications; Physical Characteristics - Dell U2913WM User Manual

VESA, 2560 x 1080 66.7

Electrical Specifications

Video input signals
Synchronization input signals
AC input voltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (Typical)
Inrush current

Physical Characteristics

Connector type
Signal cable type
Dimensions (with stand)
Height (extended)
Height (compressed)
Width
Depth
Dimensions (without stand)
Height
Width
Depth
Stand dimensions
Height (extended)
Height (compressed)
Width
Depth
Weight
Weight with packaging
Weight with stand assembly and cables
60.0
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance
DP1.2/HDMI1.4 signal input support
TTL levels required and separate syncs (including Trigger points), SOG (Composite SYNC on green)
120 V : 30 A (Max)
240 V : 60 A (Max)
15-pin D-sub miniature, blue connector; DVI-DL, white connector; HDMI/
DVI: Detachable, DVI-DL, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15 pins
DisplayPort: Detachable, DisplayPort, Solid pins
Mini-DP to DP: Detachable, DisplayPort, Solid pins, shipped detached from the monitor
High Definition Multimedia Interface: Detachable, HDMI, 19 pins
487.0 mm (19.17 inches)
358.7 mm (14.12 inches)
699.8 mm (27.55 inches)
194.2 mm (7.65 inches)
317.0 mm (12.48 inches)
699.8 mm (27.55 inches)
61.2 mm (2.41 inches)
401.2 mm (15.80 inches)
358.1 mm (14.10 inches)
288.0 mm (11.34 inches)
194.2 mm (7.65 inches)
11.35 kg(25.02 lb)
8.34 kg (18.39 lb)
185.6 +/+
DP(in)/DP(out) mDP
/ , black connector