Plug And Play Capability; Universal Serial Bus (Usb) Interface - Dell U2913WM User Manual

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using
Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if
desired. For more information about changing the monitor settings, see

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the left side of your monitor.
NOTE: The USB ports on this monitor are USB 3.0 compliant.
Transfer speed Data Power Consumption
Rate
SuperSpeed 5 Gbps 4.5 W (Max., each port)
Hi-Speed 480 Mbps 2.5 W (Max., each port)
Full speed 12 Mbps 2.5 W (Max., each port)
Low speed 1.5 Mbps 2.5 W (Max., each port)
USB Upstream
Connector
Pin Number Signal Name
1 VBUS
2 D-
3 D+
4 GND
Operating the
USB Downstream
Connector
Pin Number Signal Name
1 VBUS
2 D-
3 D+
4 GND
Monitor.