Table of Contents
Advertisement
CAUTION:
The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.
Attaching the Dell Soundbar
NOTICE:
Do not use with any device other than Dell Soundbar.
1.
Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the soundbar with the power brick.
4.
Plug the power cable of the brick to a nearby power outlet.
5.
Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Removing the Base
NOTE:
To prevent scratches on the LCD screen while removing the base, ensure that the monitor is placed on a clean surface.
After placing the monitor panel on soft cloth or cushion, complete the following steps to remove the base.
Advertisement
Table of Contents
