Factory Reset
Reset all OSD settings to the factory preset values.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following message:
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1366 x 768.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
If you press any button other than the power button one of the following messages will appear :
If VGA cables are not connected, a floating dialog box as shown below appears.
OSD
Monitor Specifications
for the