Table of Contents
Advertisement
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Reset Display
Select this option to restore default display settings.
Settings
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
Other Settings
screen, and so on.
Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch and Japanese).
Language
Menu Transparency
Select this option to change the menu transparency by pressing
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Menu Timer
Use the
Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except the
Menu Lock
button.
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock
selected. Select "Unlock" to unlock and allow user access to all applicable settings.
DDC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
LCD Conditioning
Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run.
You can enable this feature by selecting "Enable".
or
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
or
(Minimum: 0 ~ Maximum: 100).
Advertisement
Table of Contents
