Table of Contents
Advertisement
Controls a nd Features
4
Recoil Starter
\
Cutting
Height
Adjustment
Lever (one at
each wheel)
Mulching Baffle ..............._-_
J
Figure 4-1
8lade Control
Re¢oU Starter
The blade control
is attached
to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the
unit. Release it to stop engine and blade.
_
ARNING:
This blade control
is a safety device.
Never attempt
to bypass its operations.
The recoil starter is attached
to the right upper handle. Stand
behind
the unit and pull the recoil starter rope to start the unit.
MulchingBaffle (If Equipped)
The mulching
baffle is used to recirculate
grass clippings
back to
the lawn. Attach it as instructed
in the Assembly
& Set-Up section
of this manual.
CuttingHeight AdjustmentLever
One adjustment
lever is located
on each wheel and is used to
adjust the cutting
height. All four levers have to be at the same
relative
position
to ensure a uniform
cut. To adjust the cutting
height,
refer to the "Assembly
& Set-Up" Section.
11
Advertisement
Table of Contents
