Mitsubishi WD-82840 Basic Owner's Manual page 30

30 Appendices
Appendix C: Troubleshooting, continued
Control-Panel
Lock Release
System Reset
TV Reset
IMPORTANT:
Use this reset
only if other
troubleshooting
has been unsuc-
cessful.
To re-enable the
control-panel buttons
after activation of the
Control-Panel Lock
If the TV does not turn
on or off, does not
respond to the remote
control or control-
oanel buttons, or has
audio but no video.
To reset all consumer-
accessible settings
and all memories to
the original factory
defaults.
Use TV Reset if the TV
can respond to con-
trols but TV behavior is
abnormal.
CAUTION: All owner-
oerformed setups and
adjustments will be
erased.
Press and hold the INPUTbutton on
the control panel for ten seconds. If
the TV is powered off, you can now
cress the POWER button to turn it on.
Press and hold the POWER button on
the control panel for ten seconds.
1. While viewing the TV, press
MENUto display the TV main
menu.
2. With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3. READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press EXITor MENUto
back out.
• If you wish to continue,
press ENTER to erase all
memories and settings.
Allows the control panel to be
unlocked if the remote control is
misplaced.
The TV will turn off. The green
LED will flash quickly for about
one minute. The changes you
made most recently, before using
SYSTEM RESET, m ay be lost.
The TV will start the initialization
process and then turn off.
The front green LED will start
flashing. All memory and
settings outlined in this Owner's
Guide will need to be set again.
For assistance call 1(800) 332-2119