Mitsubishi WD-82840 Basic Owner's Manual page 25

740 series, 840 series 3d dlp home-cinema tv
Table of Contents

Advertisement

3.
TV Features
25
Sound Projector, continued
1,
From the Sound > SoundPro menu go to the
CUSTOM menu.
3_
4_
Position yourself in your usual viewing location.
Remain in this position, looking at the TV, while
making the following adjustments.
Adjusting Beam Angles
a.
Adjust Center Beam Angle until sound is
about equal in both ears.
b.
Adjust Left Beam Angle to maximize sound
heard from the front left side.
c.
Adjust Right Beam Angle to maximize sound
heard from the front right side.
d.
Adjust Left Surround
Beam Angle to where
the sound seems to come from the left rear
side. If this cannot be achieved, make the
setting the same as that for Left Beam Angle.
Adjust Right Surround
Beam Angle to where
the sound seems to come from the right rear
side. If this cannot be achieved, make the
setting the same as that for Right Beam Angle.
e=
Adjusting Levels
a.
Adjust Center Level to the mid level.
b.
Adjust the following levels one at a time so that
each one sounds about the same as the center
level:
Left Level
Right Level
Left Surround
Level
Right Surround
Level
c.
Check all sound levels by quickly switching
between them using • V.
d.
Readjust individual levels in small increments
and recheck as above until all sound levels
seem about the same.
Adjusting an External Subwoofer
Set Sound > Global > Subwoofer to On to
make this adjustment available.
a.
Play sample video or music containing low-
frequency bass sound.
b.
Press [A-U-_O-}.Use • • to display the Sub-
woofer option.
c.
Press • • to adjust the subwoofer volume.
5_
Note:
For assistance
call 1(800) 332-2119

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-73840Wd-73740Wd-82740Wd-92840Wd-82cb1

Table of Contents