Table of Contents
Advertisement
selecting
the
source
of the
PIP
image
If you have only an ANT-A input
connected,
you can view one program
on the
main picture
and another
channel
from the same ANT input
on the PIP
display
without
the use of a second external
tuner,
such as a VCR.
If you have ANT-A and ANT-B connected,
you can view ANT B in the main
picture
and ANT A in the PIP input.
Each time you select a different
PIP
input,
an on-screen
display
will appear
for about five seconds.
The screen
will display
the name of the input selected.
[_Important:
If you have a cable box on ANT-A, you will not be able to have
different
pictures
when both the PIP and main pictures
are from
ANT-A.
O Turn the PIP image on by
pressing
the PIP key.
To select the PIP input,
press
the PIP INPUT
key. Each time
you press the key, the PIP input
will select the next input
from
the inputs
available.
A_ltennaA _BC
7
pip
{NPUT1
S[ereaSAp
[_Important:
If the main picture
is an HD signal
from DTV, a PIP or POP cannot
be displayed.
With HDTV a message
"NO PIP display
with HDTV"
will appear
onscreen.
Using the Picture-in-Picture
(PIP) Modes
83
Advertisement
Table of Contents
