LG LWHD1200HR Owner's Manual page 13

installation
1_ Open the window, Mark a line on
center of the window stool(or desired
air conditioner Io_tion)_
Carefully place the cabinet on the
window stool and align the center
mark o,n the r_o,m front with the
center line marked in the window
stool
2, Pull the bottom window sash down
behind the upper guide until it meeLs,
Do not pul_ the window sash ,down so
tightiy that the movement of Frame
Cur_in is restfi_ed.
3, L_sely assemMe the sill support
,using the parts in Fig, 3,
4, Select the position that will place the
sill sup,po_ near the outer most _int
o,n sill (See Fig.. 4)
Be careful when you instal] the cabinet
(frame guides @ are broken so easily).
5, Attach the sill support to the cabinet
track hole in relation to the selected
position using 2 Type A screws, in
each sup_rt(See Fig. 4),.
6. The cabinet should be installed with a
very slight tilt(abo_ V_") downward
toward the outside (,See Fig. 5).
Adiust the bolt and the nut of sill
support for balancing the cabinet.
7, Attach the cabinet to the window st_
iby driving the screws ® (Type IB:
Length sixteen millimeters and
below.) through the front angle into
window stool,
8. Pull each Frame curtain fully to eaclh
window sash track, and repeat step 2_
Up_r Gude
Wind_ stool
Fror_t Angle
Fig, 1
Win_w Sash
Frame Cu_ain_
Fig, 2
INDOOR
Frame Guide@ I
Si!l
NL_®
Screw(Tyi_ A} @
OUTDOOR
Fig!,3
#
#
° /
Cabinet
INDOOR OUTDOOR
Screw(Type B)@
Sash track
Front _91e
Screw(Ty_ B)@
Fig° 5
Own,erb Manual 13