Maytag MER5770AAA User Manual page 7

COOK TIME/STOP TIME Pads
Control Options
Use to program the oven to start and stop automatically.
1. Press COOK TIME pad and enter the desired cooking
time.
2. Press the BAKE pad and enter oven temperature.
3. To delay the start of cooking, press the STOP TIME pad
and enter the time you wish the oven to turn off.
See page 14 for additional information.
Setting the Clock
1. Press CLOCK pad.
2. Press or press and hold • or V pad until the correct time
of day appears in the display.
The display will flash when electrical power is first supplied
to the range or if there has been a power failure.
To recall the time of day when another function is displayed,
press the CLOCK pad.
Clock time cannot be changed when the oven has been
programmed for clock controlled cooking, self-clean or
delayed self-clean.
Timer Beep Option
Option 1. One beep at the end of the timer operation,
then, one beep every 30 seconds for the next five
minutes or until the CANCEL pad is pressed.
Option 2. One beep at the end of the timer operation,
then, one beep every minute for the next 12 hours or
until the CANCEL pad is pressed.
Option 3, (default option) One beep at the end of
the timer operation, then, no other beeps.
Setting the Timer Beeps
1. Press the TIMER and CANCEL pads at the same
time and hold for three seconds.
• A single beep will sound.
• Display will show current option.
2, Press the • or W pad to select the option number you
wish. The current time of day will reappear in the
display after four seconds.
Clock Controlled
Oven Cooking Beep Option
Setting the Timer
The timer can be set from one minute (0HR:01 ) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently of any other oven
activity and it can be set while another oven function is
operating. THE TIMER DOES NOT CONTROL THE
0 VEN.
1. Press the TIMER pad.
, The indicator word TIMER will flash.
2. Press or press and hold the • or • pad until the correct
time appears in the display.
• The timer will staJl automatically after four seconds. A
flashing colon indicates that the timer is in use during
another function's operation.
• The last minute of the countdown will be displayed as
seconds.
3. At the end of the time set, one long beep will sound. (To
change the number of timer beeps, see next column.)
To cancel: Press and hold the TIMER pad for three
seconds. The time of day will reappear in the display.
Option 1. (default option) Four beeps at the end of
cooking, then, one beep every 30 seconds for the next
five minutes or until the CANCEL pad is pressed.
Option 2. Four beeps at the end of cooking, then, one
beep every minute for the next I2 hours or until the
CANCEL pad is pressed,
Option 3. Four beeps at the end of cooking, then, no
other beeps.
Setting Clock Controlled
Oven
Cooking Beeps
1. Press COOK TIME and CANCEL pads at the same
time and hold for three seconds,
• A single beep will sound.
• Display will show current option.
2. Press the • or • pad to select the option number you
wish. The current time of day will reappear in the
display after four seconds.
6