Audio Language, Stereo Sound - Magnavox MRD500VR Owner's Manual

66 Audio Language, Stereo Sound
Audio Language
You can selecta language f or DVDs during playback if multiple languages
are available.
Press DVD to put the System in DVD mode. The red
DVD light will appearon the front of the System.
During DVD playback, press AUDIO/BAND repeatedly
to choose one of the available languages. The new audio
will be heard.The displaywill disappear after about five
seconds.
The Audio disp!ay may show if the DVD has Dolby Digital or
multi-channel (5.1 ch) sound or its sampling rate (48 k, for
example),The number of available languages appears after the
" / "at the right of the display (/3, for example).
Example; English audio
Stereo Sound
If you connected the System to a Stereo usingthe DIGITALAUDIO
OUT COAXIAL jack as described on page 15,you cannot adjust Stereo
Sound. Otherwise, adjust Stereo Sound to determine whether you will
hear the left channel,the right channel,or both channels(stereo) during
Audio CD playback.
Press DVD to put the System in DVD mode• The red
DVD light will appear on the front of the System. _j
!
PressAUDIO/BAND duringAudio CD playback to
choose STEREO, L-CH, or R-CH.
Both right and left channels
_e heard (stereo).
Only the left channel is heard.
OPt/the Hght channel is heard.
sf_
0
If a languageis not availableafter
pressingAUDIO/BAND several
times, the DVD does not have that
language.
Some DVDs only let you change
the language in the Disc menu.
Audio languages may be
abbreviated (such as ENG for
English). Or, three dashes (- - -)
may appear instead of an
abbrevicr(ion.