LG 47LBX Owner's Manual page 97

Z
X
*Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
10.
Color (Command2:i)
To adjust the screen color.
You can also adjust color in the Picture menu.
TransmissiOn [k] [i] [ ] [set ID] [ ] [Data] [Cr]
Data Min : 0 - Max : 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' See page 96.
Acknowledgement [i] [ ] [set ID][] [OK/NG] [Data] [x]
11.
Tint (Command2:j)
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission[k] [j][] [Set ID][ ] [Data] [Cr]
Data Red : 0 - Green : 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' See page 96.
Acknowledgement [ j ] [] [Set ID] [] [OK/NO] [Data] [x]
12.
Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission[k] [k][] [Set ID][ ] [Data] [Cr]
Data Min: 0 _ Max: 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1'. See page 96.
Acknowledgement [k] [] [set ID] [] [OK/NO] [Data] [x]
13.
OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission[k] [I][] [Set !D][] [Data] [Cr]
Data 0: OSD off Data 1 : OSD on
acknowledgement [I] [] [set ID] [] [OK/NO][Data] [x]
1 4. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls
on the set.
TransmissiOn[k] [m][] [set !D][] [Data] [Cr]
Data 0: Lock off Data 1 : Lock on
Acknowledgement[m][] [Set ID][] [OK/NO] [Data] [x]
If you're not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
15
Treble (Command2:r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission [k] [r] [ ] [Set ID][] [Data] [Cr]
Data Min: 0 _ Max: 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1 '. See page 96.
Acknowledgement[r] [ ] [Set
DI[I [OK/NO]
[ Data] [x]
16. Bass (Command2:s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission[k] [s][] [set ID][ ] [Data] [Cr]
Data Min: 0 _ Max: 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1 '. See page 96.
Acknowledgement [s][] [Set ID][] [OK/NG] [Data] [x]
1 7. Balance (Command2:t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission[k] [t][] [Set ID] [ ] [Data] [Cr]
Data Min: 0 _ Max: 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1 '. See page 96.
Acknowledgement [t] [] [set ID] [] [OK/NO] [Data] [x]
1 8. Color Temperature (Command2:u)
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Transmission [k] [u][ l [Set ID][] [Data] [Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][] [Set ID][ ] [OK/NG] [Data] [x]
96