LG 47LBX Owner's Manual page 96

01. Power (Command2:a)
To control Power On/Off of the TV.
TranSmissiOn [k] [a] [ ][Set ID][ ][Data] [Cr]
Data 0 : Power Off Data 1 : Power On
ACknOWledgement [a][] [set ID][] [OKTNG] [Data] [x]
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command2:b)
To select input source for the TV.
TransmiSSiOn[k] [b][] [Set ID][ ][Data] [cr]
Data 0: DTV
Data 2:AV1
Data 4: Component 1
Data 7: ROB-PC
Data 9:HDMI2
Data 1: Analog
Data 3:AV2
Data 5: Component 2
Data 8:HDMI1
AcknowledgemenL[b][ ][set ID][ ][OK/NO] [Data] [x]
* You can select HDMI3 using (command x b).
* If you select input source, we command (command x b).
03. Input select(Command: x b)
To select input source for TV.
TransmiSsion [x] [b] [] [Set ID] [] [Data] [cr]
Data 00 : DTV (Antenna)
Data 10 : Analog (Antenna)
Data 20 : AVl
Data 40 : Component ]
Data 60 : ROB-PC
Data 91 : HDMI2
Data 01 : DTV (Cable)
Data 11 : Analog (Cable)
Data 21 : AV2
Data 41 : Component 2
Data 90 : HDMll
Data 92 : HDMI3
AcknOwledgemeni [b][] [set ID][] [OKiNG] [Data] [x]
04. Aspect Ratio (Command2:c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Picture menu.
TranSmiSSiOn[k] [c] [] [set ID] [] [Data] [Cr]
Data 1:4:3 4: Zoom 1
2:16:9 5: Zoom 2
6: Set by program
Reserved
ACknoWledgement[c] [] [Set ID] [] [OK/NG] [Data] [x]
05.
Screen Mute (Command2:d)
To select screen mute on/off.
Transmission[k] [d] [] [Set ID] [] [Data] [Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
ACkn0Wledgement [d] [ ] [set ID][] [OK/NO] [Data] [x]
06.
Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
TransmiSsiOn [k] [e][] [set ID][] [Data] [cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
ACknOwledgement
[el [ ] [set ID] [ ] [OKZNO] [Data] [x]
07.
Volume Control (Command2:f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
TransmissiOn[k] [fJ [] [set ID] [ ] [Data] [Cr]
Data Min : 0 - Max : 64(*transmit by Hexadecimal code)
Refer to 'Real data mapping 1 ' as shown below.
Acknowledgement [f] [] [set ID][ ] [OK/NO] [Data] [x]
08.
Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
TransmissiOn [k] [g] [] [Set ID] [] [Data] [Cr]
Data Min : 0 - Max : 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
AcknoWledgement [g] [] [Set ID] [] [OK/NO] [Data] [x]
09.
Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission[k] [h][] [set ID][] [Data] [Cr]
Data Min : 0 _ Max : 64(*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement[h] [] [Set ID] [] [OK/NO] [Data] [x]
m
Z
X
95