KitchenAid KDRP407H Use And Care Manual page 11

Professional dual fuel range
Hide thumbs Also See for KDRP407H:
Table of Contents

Advertisement

sing and Caring for Your Cooktop
Your cooktop
is designed
for ease of care.
You can do most cleaning
with items found
around
the home. Cleaning
your cooktop
whenever
spills or soiling
occur will help to
keep it looking
and operating
like new.
NOTES:
• Before
cleaning
make sure all controls are
off and the cooktop is cool.
• Do not obstruct
the flow of combustion
and ventilation air around the burner grates
edges.
Surface burners
• The burner
caps should
be routinely
removed
and cleaned.
Always
clean burner
caps after a spillover.
Keeping the burner
caps clean prevents
poor ignition and an
uneven flame.
• For proper
flow of gas and ignition
of the
burner,
do not allow spills, food,
cleaning
agents,
or any other material
to enter the gas tube opening,
• Occasionally
check
the burner flames for
proper size and shape
as shown later in
this section. A good flame is blue in color. If
flames
are not burning at all ports, you may
need to clean the burner ports.
To clean burners
and burner caps:
Burner cap
/
_
• Ignitor
i//
Gas tube
_\_,_._/'"
open!rig
(orifice)
,
2.
=
Lift the burner cap straight up from the
burner base.
Clean burner cap with warm, soapy water
and a sponge.
For stubborn
stains, clean
with a non-abrasive scrubbing pad or mild
abrasive
powdered cleanser. Wipe dry.
Do not clean burner cap in dishwasher.
If the gas tube opening
or the orifice,
located inside the opening, has become
soiled
or clogged, use a damp cloth to
clean the area.
4. If ports are clogged,
clean them with a
straight
pin. Do not enlarge
or distort
the port. Do not use a wooden
tooth-
pick. if the burner
needs to be adjusted,
call a qualified
technician
for service.
5. After cleaning
the gas tube opening
and
ports, replace
the burner cap. To re-
place
burner
cap, make sure cap is
properly
aligned
and leveled.
6. Check the burner after cleaning
for proper
lighting. If the burner does not light after
you have cleaned
it, recheck
cap
alignment
or contact a designated
service
technician.
Do not service the sealed
burner yourself.
11

Advertisement

Table of Contents
loading

Table of Contents