Navman iCN 700 Series Installation Manual page 5

Mount the iCN in a position that is secure and does not obstruct the driver's view.
Do not mount the iCN in a way that may interfere with the safe operation of the vehicle, the
deployment of air bags or other safety equipment.
Do not operate the iCN while driving.
Before you use your iCN for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by the iCN may be further than the distance shown
on road signs. Road signs show the distance to the start of an exit while your iCN shows the distance
to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow
distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the
country of use. You are responsible for checking that you can legally use the information in your
country or in the country where the information will be used.
Do not handle the iCN while it is hot. Let the product cool, out of direct sunlight.
Do not expose the iCN to direct sunlight in an unattended vehicle for prolonged periods. Overheating
may damage the unit.
To discourage theft, do not leave the iCN, mounting bracket or any cables in plain view in an
unattended vehicle.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property
damage. Navman disclaims all liability for installation or use of the iCN that causes or
contributes to death, injury or property damage or that violates any law.
iCN 700 Series - Map Installation Guide
5