E3: Flash Cntrl For Built-In Flash - Nikon D7100 User Manual

e3: Flash Cntrl for Built-in Flash

Choose the flash mode for the built-in flash.
Option
1 TTL
2 Manual
3 Repeating flash
4 Commander mode
Manual
Choose a flash level between Full and 1/128 (
built-in flash has a Guide Number of 12/39 (m/ft, ISO 100, 20 °C/68 °F).
Repeating Flash
The flash fires repeatedly while the shutter is open, producing
a strobe-light effect. Press 4 or 2 to highlight the following
options, 1 or 3 to change.
Option
Output Choose flash output (expressed as a fraction of full power).
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
Times
option selected for Frequency, the actual number of flashes
may be less than selected.
Frequency Choose how often the flash fires per second.
A
Flash Control Mode
The flash control mode for the built-in flash is shown in the
information display (0 122).
A
"Manual" and "Repeating Flash"
Y icons flash in the control panel and viewfinder when these options are selected.
U
246
Flash output is adjusted automatically in response to shooting
conditions.
Choose the flash level (0 246). The camera does not emit monitor pre-
flashes.
The flash fires repeatedly while the shutter is open, producing a strobe-
light effect (0 246).
Use the built-in flash as a master flash controlling remote optional flash
units in one or more groups (0 247).
Description
G button A Custom Settings menu
Description
1
/ of full power). At full power, the
128