Nokia 5210 User Manual page 45

Creating a new ringing tone
1. Scroll to the tone you want to
edit and press Select.
2. Enter the desired notes. For
example, press
(shown as f ). The phone plays
each note after it is entered
(unless the phone tones are off).
3. To adjust the characteristics of
the note:
• Note duration:
shortens (-) and
lengthens (+) the duration of
the note or rest. The default
duration is 1/4. The duration
is shown in front of the note,
for example16d
note d with duration 1/16.
Pressing and holding a note
key lengthens the note by
half, indicated by a dot after
the duration, e.g. 8.a.
• Rest: inserts a rest (that
is, a pause) of the same
duration as the previous note.
The default duration of a rest
is one quarter note (1/4). The
rest is indicated by the -
character.
for note f
denotes a
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
• Octave:
for new notes. The octave is
shown as a number after the
note (e.g. e1).
• Pitch:
sharp (indicated by
of the note), e.g. #f. The pitch
selection is not available for
notes e and b.
4. To edit the notes:
• and
right or left, respectively.
• Clear deletes a note or a rest
to the left.
5. After you have completed the
tone, press Options, select one of
the following options, and press
OK: Play, Clear
Select Save to name the tone and
add it to the ringing tone list,
Tempo to set a tempo for the
tone (in beats per minute) or
Send to send the composed tone
as a text message to a
compatible phone.
sets the octave
makes the note
# in front
move the cursor
screen, Exit,
33