Pfaff Hobby 1010 Instruction Manual page 14

Note: Quilt guide can be purchased separately.
1.MARK WITH A PENCIL OR CHALK THE EXACT LENGTH OF THE BUTTONHOLE ON THE FABRIC.
2. REMOVE THE REGULAR PRESSER FOOT AND ATTACH THE BUTTONHOLE FOOT & PUT THE FAE
UNDER ThE BUTTONHOLE FOOT.
3. SET THE STITCH LENGTh KNOB ON '0', ZIGZAG WIDTH KNOB ON '5' AND NEEDLE POSITION KNOt
CENTER POSIflON , THEN SEW 3-5 STITCHES AS FIGURE (1).
4. SET STITCH LENGTH ABOUT 0.5, ZIGZAG WIDTh KNOB ABOUT '2' NEEDLE POSITION KNOB ON L
POSITION, THEN SEW AS FIGURE (2) IJNTILL YOU REACHES THE END OF THE MARKING.
5. SET ZIGZAG WIDTH KNOB ON '5' THEN SEW 3-5 STITCHES AS FIGURE (3).
6. SET THE STITCH LENGTH KNOB ABOUT 0.5, ZIGZAG WIDTH KNOB ON 2, NEEDLE POSITION KNOB
RIGKT POSITION, PUSH ThE R BUTTON SEW UNTJLL YOU REACHES THE END OF THE MARKING
FIGURE (4).
7. REMOVE FABRIC FROM THE MACHINE AND OPEN ThE BUTTONHOLE WITH A BUTTONHOLE CUT
OR SEAM CUTTER.
1.Slide atm through hole on top of presser foot holder.
1. Use seam guide when sewing a long seam of regular distance
from
edge of material.
2. Set guide hole on bed, at right of needle plate, and adjust dis
tance from the needle to the guide for desired seam allowance.
3. Run machine with edge of material touching guide.
with
.Move guide to regüired stitch distance.
Note: Seam guide can be purchased separately.
p
41
fit
— —