Advertisement
Points to observe during sewing
Thread cutter
In order to be able to use thread cutter
39 it is necessary to sew beyond the
end of the seam. Draw the resulting
thread chain through the thread cutter
from
the
rear (see illustration below
left).
Securing the seam:
Knot
the thread
chain. For knit fabrics,
a crochet needle can be used to pull
the thread chain into the seam.
Or:
Sew about 5 cm (2") beyond the end of
seam. Turn the workpiece around and
sew a few stitches over the seam just
sewn without cutting the thread chain.
Sew the first stitches slowly. If the
machine has been rethreaded, place
the fabric under sewing foot 14 and
push
it
up to the needle before starting
to sew.
Since the fabric is fed automatically, do
not pull or push the fabric. Use your
hands for guiding only.
14
Advertisement
