Carrying-Case; Top Cover; Connecting The Foot Control; Main Switch - Pfaff 1540 Owner's Manual

Operate your Pfaffselect
Carrying-case
Place the cords, foot control and
instruction book in the compartment of
the carryingcase
Top cover
Open the folding cover (6) upwards
The stitches of the sewing machine are
illustrated on the inside of the top cover.
Connecting the foot control
Connect the plug of the foot control to
the connecting socket (1) of the sewing
machine and to the wall socket. The
sewing speed is regulated by pressing the
foot control.
Additionally, you can regulate the sewing
speed by moving the slide on the front
part of the foot control.
Position
=
half speed
Position
*
=
full speed
For this sewing machine, a foot controller
typ AW 0253 or AE 013 must to be used.
Main switch
When the main switch (2) is switched on,
the sewing lamp lights up.
The sewing machine is now ready to use.
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fif, contact a
qualified electrician to install the proper
outlet. Do not modify the plug in any way
:22OV
—
'12OV