Advertisement
prog
______
Fold ready-made bias binding lengthwise anc
shape-press. Push the folded binding over the fabri(
edge and baste it in place, if required. Then se
it on with straight stitches (Fig. 1).
Sewing foot:
Binder (special accessory)
Program:
00
Stitch length:
2.5 mm,
(Fig. a)
or
Program:
10
Stitch-width:
2.5 mm
Stitch length:
1.5 mm,
(Fig. b)
Remove sewing foot and screw on binder. Inserl
the bias tape in the scroll of the binder and pul
it out to the rear. Set the binder in such a way that
the needle enters 1 to 1.5 mm from the turned-ir
bias edge. Sew a number of stitches along the bias
tape. Place the raw edge in the groove of the bin'
der. During sewing, the bias tape is wrapped auto
matically over the material edges. Sew the bias
tape on with the above mentioned program or a
program of your own selection. Straight material
edges are the simplest to bind (Fig. 2).
1:
Advertisement
