Advertisement
Dropping the machine feed
Remove cover 108 or free arm cover 122.
Open free arm cover 122. Push the
drop-feed control toward N. The feed dog is
dropped for embroidering, darning, basting
etc.
For sewing, push the drop-feed control
toward 0.
Replace cover 108 or close free arm cover.
122.
Changing the needle
Raise the needle bar. Then hold the needle,
loosen screw N and pull the needle out
downwards. Insert a new System 130/705 H
needle (with the flat side of its shank facing
toward the back) and push it up as far as it
will go. Then tighten screw N.
Twin needles with a needle distance of
1.4 mm may be used for zigzag and utility
stitch sewing.
18
Advertisement
