Olympus STYLUS TOUGH-6010 Instruction Manual page 45

Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Selecting the video signal system to match your TV [VIDEO OUT]
E SETUP
VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
Submenu 2
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on
PAL Connecting the camera to a TV in European countries, China, and so on
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)."
For details on changing the input source of the TV, refer to the TV's instruction manual.
4 Set the mode dial to q, and use ABCD to select the image for playback.
Depending on the TV's settings, the displayed images and information may become cropped.
Application
AV cable (supplied)
Connector cover
Multi-connector
EN 45