Table of Contents
Advertisement
Setting the date and time [
Setting the date and time [X
x (Settings Menu 2)
"Language, date, time, and time zone" (p. 15).
To select the date display order
To select the date display order
1 Press I after setting Minute, and use FG to select the date
display order.
2 Press the A button to set.
To check the date and time
To check the date and time
Press the INFO button while the camera is turned off. The current time
is displayed for approx. 3 seconds.
Choosing home and alternate time zones [World Time]
Choosing home and alternate time zones [World Time]
x (Settings Menu 3)
You will not be able to select a time zone using [World Time] if the camera clock has not fi rst been set using [X].
Submenu 2
Submenu 3
x
Home/Alternate
z
x
*1
z
*1, 2
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
*1
*2
When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone (x) to display the time in the travel destination time zone (z).
Restoring data in the camera [Reset Database]
Restoring data in the camera [Reset Database]
x (Settings Menu 3)
Playback will become available by performing [Reset Database] when the Photo surfi ng function is not activated
properly. However, data such as collections and other groups created with the [ib] (PC software) is deleted from the
database in the camera.
Import the data back into the camera from a computer to playback the data created with the [ib] (PC software).
56 EN
For information on using the menus, see "Setup menu" (p. 8).
X ] ]
X
World Time
The time in the home time zone (the time zone selected for x in submenu 2).
The time in the travel destination time zone (the time zone selected for z in
submenu 2).
—
Select the home time zone (x).
—
Select the travel destination time zone (z).
Reset Database
X
Y
.
2012 02 26
Date order
Application
MENU
Back
M
D
Time
-- --
.
:
Y / M / D
Advertisement
Table of Contents
