Selecting The Iso Sensitivity - Olympus SH-25MR Instruction Manual

When the white area is not large enough or when the
color is too bright, too dark, or loud, the white balance
cannot be registered. Return to Step 2. Or, set the
other white balance.

Selecting the ISO sensitivity

1
Select the ISO setting option in the function
menu.
2
Use HI to select the setting option, and
press the A button to set.
Option
The camera automatically adjusts
ISO Auto the sensitivity according to the
shooting scene.
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
High ISO Auto
blur caused by a moving subject or
by camera shake.
The ISO sensitivity is fi xed to the
Value
selected value.
ISO stands for International Organization for
Standardization. ISO standards specify the sensitivity
for digital cameras and fi lm, thus codes such as "ISO
100" are used to represent sensitivity.
ISO Auto
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
ISO ISO ISO ISO ISO ISO
3200 3200 AUTO AUTO HIGH HIGH 100 100
16
M
MENU MENU
1/400 1/400 F3.0 F3.0
Description
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
1
Select the drive option in the function menu.
Option
One frame is shot each time the shutter
o
button is pressed.
The camera takes sequential shots at
approximately 2.3 frames/sec.
The camera takes sequential shots at
approximately 10 frames/sec.
The camera takes sequential shots at
c
approximately 15 frames/sec.
The camera takes sequential shots at
d
approximately 60 frames/sec.
The camera takes up to 16 photos at
regular intervals while holding the shutter
(Auto Split
button.
Shooting)
Single
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
MENU MENU
Description
EN
35