On-Screen Display Menus; How To Operate - Optoma Projector User Manual

On-screen Display Menus

The Projector has multilingual On-screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.

How to operate

1. To open the OSD menu, press "Menu" on the Remote Control or
Control Panel.
2 When OSD is displayed, use ◄► keys to select any item in the
main menu. While making a selection on a particular page, press
▼ or "Enter" key to enter sub menu.
3. Use ▲▼ keys to select the desired item in the sub menu and then
press ► or "Enter" key to view further settings. Adjust the settings
by ◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press "Enter" or "Menu" to confirm, and the screen will return to
the main menu.
6. To exit, press "Menu" again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Sub Menu
User Controls
IMAGE
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Advanced
Photo
Settings
29
English