Use Philips EasyLink
Maximising the use of your Philips EasyLink HDMI-
CEC-compatible device can enhance its control
functions to the maximum level of efficiency.
HDMI-CEC-compliant devices that are connected
through HDMI connectors can be controlled by
the TV's remote control.
To enable Philips EasyLink, you will need to:
•
connect two or more HDMI-CEC compatible
devices through the HDMI interface.
•
confirm that every HDMI-CEC compatible
device is functioning properly.
•
switch to EasyLink.
Note
•
The EasyLink-compliant device must be switched on and
selected as the source.
•
Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
Enable or disable EasyLink
After enabling the HDMI-CEC-compliant device,
the TV will automatically turn on and switch to the
correct source.
Note
•
Do not enable Philips EasyLink if you do not intend to
use it.
1
Press
ADJUST.
2
to select [EasyLink].
Press
3
Select [Off] or [On] and then press OK.
Use One-touch Play
1
After enabling EasyLink, press play on your
device.
» The TV will automatically switch to the
correct source.
Use One-touch Standby
1
Press
(Standby-On) on the remote
control.
» The TV and all connected HDMI
devices will switch to standby mode.
EN
25