Specifications; Model Number; Engine; Fuel System - Exmark Viking Hydro VH15KA362 Operator's Manual

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 670,000 & Higher: VH15KA362; VH15KA483

2.2 ENGINE

2.2.1 Engine Specifications: See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).

2.3 FUEL SYSTEM

2.3.1 Capacity: 5.0 gal. (18.9 L.)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries
using the research method, it should be a 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut-Off Valve: 1/4 turn

2.4 SAFETY INTERLOCK SYSTEM

Operator must have speed control lever in neutral and PTO disengaged to start engine.
Release of OPC levers will cause the engine to stop if speed control lever is not in
neutral and/or PTO is engaged.

2.5 STEERING/BRAKE CONTROL

Fingertip drive control levers provide independent speed control, braking and neutral to
each drive wheel for moving forward or reverse, stopping and power turning.

2.6 TRANSMISSION

Twin Hydrostatic Drive
2.6.1 Two Hydro Gear variable displacement pumps independently coupled to two
high efficiency Parker/Ross wheel drive motors.
2.6.2 Hydraulic Filter is replaceable cartridge type.
P/N 109-4180: 25 microns, 10 psi bypass (Summer use above 32° F (0° C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F (0° C))
2.6.3 Speed Range: Forward 0 - 6.2 mph (10.0 km/h)

2.7 WHEEL DRIVE SYSTEM

Drive wheels are direct coupled to Parker/Ross wheel drive motors with 1.0" (25.4 mm)
tapered shaft.

2.8 TIRES

Size
Quantity
Tread
Ply Rating
Pressure
Reverse 0 - 2.2 mph (3.5 km/h)
Drive
36" Deck
Pneumatic (Air-Filled) Pneumatic (Air-Filled)
16 x 6.50-8
2
Turf Master
4
14 psi (97 kPa) 14 psi (97 kPa)
10
Front Caster
48" Decks All decks
Semi-Pneumatic
16 x 7.50-8 9 x 3.50-4
2
Turf Master Smooth
4
2