Attach Lower Hose Holder; Storing Hose And Nozzle On Rack - Hoover SteamVac F5851 Owner's Manual

Press cord into cord clip on back of handle,
Pull cord tight (Fig. 8).
Attach lower hose ho|der
HOSE
HOLDER
1
With front of deep cleaner resting on floor, place 2 projections
on lower hose holder into 2 holes on back of cleaner (Fig 9).
Push screw into hole and tighten securely with a Phillips screw
driver (Fig 10).
Stori.g hose and nozzle on rack
NOZZLE CONNECTOR _
END OF HOSE
Stretch hose out and identify ends.
Note: You may find it helpful when storing the hose and nozzle
to refer to the information on the back of the deep cleaner
and on the converter end of the hose (Fig. 11 ).
4 Assembly
HOOK
CLIP 1
NOZZLE
CONNECTOR
CLIP 1
To store hose on rack, begin by placing nozzle connector end
of hose (straight end) into clip 1 on rack (Fig. 12).
_ i/1 2
Secure hose to rack at numbered locations as shown.
(Fig. 13)
EXTENSION
HOOK
Converter is stored in area as
shown.
ALIGN ARROW
& HOOK FOR
CONVERTER
While aligning arrows (Fig. 14), place extension into bottom of
converter opening; then push converter firmly against deep
cleaner until it snaps into place.
To remove, first pull top of converter off extension then pull off
bottom.
Secure solution hose to converter as shown.