GE JMS08 Owner's Manual page 12

Careand cleaningof therange.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
How to Remove Packaging Tape
To assure no damage is done to the finish
of the pro&_ct, the safest way to remove
the adhesive left fi_om packaging rope on
new appliances is an application of a
household liquid dishwashing detergent,
mineral oil or cooking oil.
Apply wifll a soft cloth and allow to soak.
Wipe dU and then apply an appliance
polish m thoroughly clean and promct
the surf_tce.
NOTE:Theplastictapemustbe removed fromaft
chrome trim,It cannot b eremoved if it isbakedon,
Pull the knob straight off the stem,
Control Panel and Knobs
Clean up spatters with a damp cloth.
Remove heavier soil widl warm, soapy
water.
Donotuseabrasives o f anykindon thecontrol
panel
The control knobs ulay be relnoved fbr
easier cleaning. To relnove a knob, pull it
straight offthe stem. Wash the knobs in
soap anti water but do not soak.
Oven Vent
Tile oven is vented through an opening
under tile right rear suK_me unit.
Nevercovertheopening withaluminum foil or
anyothermaterial,
Porcelain Enamel Cooktop
The porcelain enamel finish is sturdy but
breakable iflnisused. This finish is acid-
resistant. However, aW acidic floods
spilled (such as fruit juices, tomato or
vinegar) should not be pexmitted to
remain on the finish. If acids spill on the
cooktop while it is hot, use a dU paper
towel or cloth to wipe it up right _-I'v_ly.
When the surfdce has cooled, wash with
soap anti water. Rinse well.
Forotherspillssuchasfat spatterings, wash
with soapandwaterorcleansing p owders aRer
thesurface hascooledRinse well, Polishwith a
drycloth,
Painted Surfaces
Painted suK:dces include the sides and tile
drawer fi'ont.
Clean these with soap and water or a
vinegar and water solution.
Do not
use
COUlUlercialoven cleaners,
cleaning powders, steel wool or harsh
abrasives on a W painted SUI_[:dce.
12