Frigidaire FGEF306TMFB Use & Care Manual page 15

SETTING THE CLOCK
The SET CLOCK pad is used to set the clock, The clock
may be set for 12 or 24 hour time of day operation.
The clock has been preset at the factory for the 12 hour
operation, When the range is first plugged in, or when
the power supply to the range has been interrupted, the
timer in the display will flash,
To set the clock (example below for 1:30)
1. Press SET CLOCK, "CLO" will appear in the display.
2, Press 1 30 pads to set the time of day to 1:30,
"CLO" will stay in the display.
3, Press START, "CLO" will disappear and the clock will
start,
CHANGING BETWEEN 12 OR 24 HOUR
TIME OF DAY DISPLAY
1. Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2, CONTINUE holding the pad until "12Hr dAY" or
"24Hr dAY" appears in the display and the control
beeps once.
3, Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Hr dAY" or "24Hr dAY".
4, Press START to accept the change or press CANCEL
to reject the change.
5, Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.
SETTING CONTINUOUS BAKE OR 6 HOUR
ENERGY SAVING
The TIMER and SELF CLEAN pads control t he
ContinuousBake or 6 Hour EnergySavingfeatures. The
oven control has a factory preset built-in 6 Hour Energy
Saving feature that will shut off the oven if the oven
control is left on for more than 6 hours. The oven can
be programmed to override this feature for Continuous
Baking,
To set the control for Continuous Bake or 6 Hour
Energy Saving features
1. Press and hold TIMER for 6 seconds.
After 6 seconds "6Hr OFF" or "STAY On" will appear
in the display and the control will beep once.
2. Press SELF CLEAN to switch between the 6 Hour
Energy Saving and continuous bake features.
Note: "6Hr OFF" in the display indicates the control is set
for the 6 Hour Energy Saving mode and "STAY On"
indicates the control is set for the Continuous Bake
feature.
3. Press START to accept the change (display will
return to time of day) or press CANCEL to reject the
change.
SETTING TEMPERATURE DISPLAY =
FAHRENHEIT OR CELSIUS:
The BROIL and SELF CLEAN pads control t he
Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures
in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius
press BROIL and hold it for 6 seconds; "550 °"
will appear and "BROIL" will flash in the display
and a beep will sound. If"FAhrnht" appears, the
display is set to show temperatures in Fahrenheit.
If "CELSIUS" appears, the display is set to show
temperatures in Celsius.
2. Press SELF CLEAN to switch between Fahrenheit or
Celsius display modes. The display will show either
"FAhrnht" or "CELSIUS".
3. PressSTART to acceptthechange or pressCANCEL
to reject
the change.