Dimensions; Torque Requirements; Assembly Instructions; Uncrate Mower - Exmark Lazer Z XS Operator's Manual

Exmark zero turn riding mower operator's manual
Hide thumbs Also See for Lazer Z XS:
Table of Contents

Advertisement

2.10 DIMENSIONS

2.10.1 Overall Width:
60" Deck
72" Deck
2.10.2 Overall Length:
60" Deck
72" Deck
2.10.3 Overall Height:
60" Deck
72" Deck
2.10.4 Tread Width: (center to center of tires, widthwise)
60" Deck
72" Deck
2.10.5 Wheel Base: (center of caster to center of drive tire)
60" Deck
72" Deck
2.10.6 Curb Weight:
60" Deck
72" Deck

2.11 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut ........................................ 140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt.................................................... 115-120 ft-lbs. (156-163 N-M)
Engine Deck/Front Frame Mount Bolts............................... 30-35 ft-lbs. (41-47 N-M)
Anti-Scalp Roller Bolts ........................................................ 40-45 ft-lbs. (54-61 N-M)
Engine Mounting Bolts ....................................................... 30-35 ft-lbs. (41-47 N-M)
Wheel Lug Nuts .............................................................. 90-95 ft-lbs. (122-129 N-M)
Wheel Motor Mounting Bolts............................................. 72-77 ft-lbs. (98-104 N-M)
Wheel Hub Slotted Nut .............................................. minimum 125 ft-lbs. (169 N-M)
Rollover Protection System (Roll Bar) Mounting Bolts ....... 30-35 ft-lbs. (41-47 N-M)

3. ASSEMBLY INSTRUCTIONS

3.1 UNCRATE MOWER

3.2 INSTALL ROLLOVER PROTECTION SYSTEM (ROLL BAR)

3.2.1
Disassemble roll bar from the crate.
a) Remove roll bar tubes from sides of crate.
b) Remove the two brackets used to mount the bottom of the upper roll bar tube
to the crate. Remove the 1/2-13 x 3 1/4 capscrews and 1/2-13 hex flange
lock nuts from the two brackets at each end of the upper roll bar tube and
retain for later use.
3.2.2
Install the two lower roll bar tubes.
a) Locate the left and right lower roll bar tubes.
b) Align lower roll bar tubes along wheel motor channels as shown in Figure 2.
without deck
deflector up
54.5 in. (138.4 cm)
61.4 in. (156.0 cm)
58.5 in. (148.6 cm)
73.2 in. (185.9 cm)
Roll Bar – Up
Roll Bar - Down
82.2 in. (208.8 cm)
92.3 in. (234.4 cm)
86.0 in. (218.4 cm)
96.1 in. (244.1 cm)
Roll Bar - Up
Roll Bar - Down
73.7 in. (187.2 cm)
55.6 in. (141.2 cm)
73.7 in. (187.2 cm)
55.6 in. (141.2 cm)
Drive Wheels
42.8 in. (108.7 cm)
38.9 in. (98.8 cm)
46.8 in. (118.9 cm)
47.6 in. (120.9 cm)
54.0 in. (137.2 cm)
56.8 in. (144.3 cm)
1450 lbs. (658 kg)
1520 lbs. (689 kg)
- 13 -
deflector down
72.2 in. (183.4 cm)
84.3 in. (214.1 cm)
Casters
Torque

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents