Table of Contents
Advertisement
Setupmenuoperation- Audio menuoptions
Press MENU on the side panel or on the remote control and then use A / v to select the AUDIO menu, press ENTER
button to enter it (see the picture below).
1.
Use A / T to select what you want to adjust in the AUDIO menu.
2.
Press ENTER or _ button to adjust(according
to the guiding sign in the bottom right corner of the menu).
3.
When you are satisfied with your adjustment.
Press MENU to exit.
Balance
Press A / T button to select it and then use _
/ _ to adjust the audio output between left and right speakers.
Bass
Press _, / v button to select it and then use _
/ =, to increase or decrease the level of the lower-pitched sounds.
Treble
Press _, / v button to select it and then use _
/ =, to increase or decrease the level of the higher-pitched
sounds.
Sound Mode
You can use the preset sound (User / Voice / Concert, or Jazz).
Or you may select the sound mode as User / Voice / Concert or Jazz directly by pressing the SOUND button on the remote
control.
Surround Sound
Press A / v button to select it and then use to select the surround sound on or off.
SPDIF Type
Press A / v button to select it and then use to select the one of modes of the digital audio output such as PCM and RAW or
off.
]8
Hide quick links:
Advertisement
Table of Contents
