Audio Menu Options; Tv Menu Options - Element ELDFW462 Instruction Manual

Operating Your Television

Audio Menu Options

MENU
Press on the front panel or
OK
menu, press or
Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting
Sound in AUDIO menu.
Balance
/
Press and then use
Bass
/
Press and then use
Treble
/
Press and then use
Sound Mode
/
Press to select one of the modes options: Concert, Jazz, User, Voice
Surround Sound
/
Press to switch Surround Sound On or Off
SPDIF
/
Press to select between PCM, OFF or RAW
Auto Volume Control
/
Press to switch auto volume control On or Off.

TV Menu Options

MENU
Press the on the front panel or
OK
menu, press or
Tuner Mode
Select the signal input mode: Antenna or Cable
Channel Scan
Channel Scan
Select "
MENU
Press to stop or continue until the scan is complete;
Stopping in the middle of a scan will save the
scanned channels up to the stop point.
MENU
to enter (see picture below).
/
to adjust the audio output between left and right speakers.
/
increase or decrease the level of the lower-pitched sounds.
/
to increase or decrease the level of higher-pitched sounds
MENU
to enter (see picture below).
OK
"; press to start the channel scan.
on the remote control and then use
/
1. Use to select the option you want to adjust
in the Audio menu.
/
OK
2. Press or
3. When you are satisfied with your adjustment, press
to exit.
This function allow
on the remote control and then use
/
1. Use to select the option you want to adjust
in the TV menu.
/
OK
2. Press or
3. When you are done, press
15
/
to select the
to adjust (according to the hints below)
s volume to be controlled automatically.
/
to enter the desired function.
MENU
to exit.
AUDIO
MENU
to select the TV