Advertisement
Cycle times are approximate
and vary by options
selected.
Hot water is necessary
to activate
dishwasher
detergent
and melt fatty food soils.
An automatic
sensor checks the incoming
water temperature
for the main wash of
each cycle, delaying
the timer if necessary,
until the water is hot enough.
When HI-
TEMP WASH is selected,
the sensor checks for an even higher temperature.
j_•
i_ j_•
_l
_
_ _ i¸
:_
z
I ,I,
,I ,I I
lhl,
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The Smart Sensor
checks the soil level on your dishes in the Auto, Heavy, Normal
and Short Wash cycles.
Depending
on soil level, the sensor will determine
if
additional
water fills are needed to clean the dishes or if water fills can be deleted.
Cycle time and water usage will vary based on the amount
of soil on the dishes.
Cycle time will also vary based on the options
selected
and the incoming
water
temperature.
AutoWash
When a partial load of lightly soiled dishes is placed in the unit, a wash cycle
similar to a short wash will automatically
be performed.
When a full load of heavily
soiled dishes is placed
in the unit, a heavy wash cycle will automatically
be
performed.
The dishwasher's
Smart Sensor
technology
will determine
the type of
cycle required
to clean the dishes and will clean more efficiently
every time. Water
usage ranges
from 3.7 to 7.3 gallons.
Wash time ranges between
1.2 and 1.6
hours.
HeavyWash
For pots, pans, casseroles
and dinnerware
with dried-on
or baked-on
soils. Water
Advertisement
