Getting Started; Setting Clock At Power Up; Temperature Visual Display; Features - Electrolux EI27EW45KB1 Use & Care Manual

i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i
Control pad functions
20. Oven Pad- Used to select the upper oven or
the lower oven.
21. User Preference Pad- Used to bring the user
preference menu in the display.
22. Timer on-off Pad- Used to set or cancel the
minute timer. The minute timer does not start or
stop cooking.
23. Cancel Pad- Used to cancel any functions
previously entered except the time of day and
the minute timer. Push Cancel Pad to stop
cooking.
24. Start Pad- Used to start all oven functions.
25. 0 thru 9 Number Pads- Used to enter
temperature and times.
26. - Io Pad- Used to lower the temperature and
times.
27. + hi Pad- Used to raise the temperature and
times.
Gettin Started
Setting clock at power up Temperature visual display
When the unit is first plugged in, or when the power Your oven is equipped with a temperature visual
supply to the range has been interrupted, the timer
in the display will flash with "CLO 12:00". The clock
cannot be set when the oven is on. If an invalid
time of day is entered, the control will triple beep to
prompt you to re-enter a valid time of day.
To set the clock (example for 1:30)
1. Press 1 3 0 pads to set the time of day to 1:30.
The pads HI or LO can also be pressed to raise
or lower the actual time displayed.
2. Press START to accept the changes or CANCEL
to start with a time of 12:00.
display for each oven. When a cooking mode is set,
the actual temperature will be shown in the display
and will rise as the unit preheats. When the unit has
reached its target temperature, a chime will sound
to remind you to place the food in the oven. This
feature will be active with some cooking modes; bake,
convection bake and convection roast. The cooking
modes which does not feature the temperature visual
display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed
is 100°F.