Dimensions; Torque Requirements; Assembly Instructions; Uncrate Mower - Exmark Lawn Tractor Operator's Manual

2.10 DIMENSIONS

2.10.1 Overall Width:
2.10.2 Overall Length:
2.10.3 Overall Height:
2.10.4 Tread Width: (center to center of tires, widthwise)
2.10.5 Wheel Base: (center of caster tire to center of drive tire)
2.10.6 Curb Weight:

2.11 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut (secured with threadlocker) 140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt...........................................................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ..............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller Nuts........................................................40-45 ft-lbs. (54-61 N-m)
Engine Mounting Bolts ......................................................30-35 ft-lbs. (41-47 N-m)
Wheel Lug Nuts .............................................................90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ..............................................minimum125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .......30-35 ft-lbs. (41-47 N-m)
Deck Drive Jackshaft Nut ..............................................75-80 ft-lbs. (102-108 N-m)
Clutch Retaining Bolt (secured with threadlocker)..............55-60 ft-lbs. (75-81 N-m)

3. ASSEMBLY INSTRUCTIONS

3.1 UNCRATE MOWER

3.2 INSTALL ROLLOVER PROTECTION SYSTEM (ROLL BAR)

3.2.1 Disassemble roll bar from the crate.
a) Remove roll bar tubes from sides of crate and remove screws that attach the
wheel hub retaining plate to the bottom of the crate.
b) Remove the two brackets used to mount the bottom of the upper roll bar tube
to the crate. Remove the 1/2-13 x 3 1/4 capscrews and 1/2-13 hex flange
lock nuts from the two brackets at each end of the upper roll bar tube and
retain for later use.
3.2.2 Raise the rear of the unit and support it with jack stands or equivalent support.
without deck
w/52" Deck 49.8 in. (126.5 cm)
w/60" Deck 53.8 in. (136.7 cm)
w/52" Deck
Roll Bar - Up 78.2 in. (198.7 cm)
Roll Bar - Down 88.9 in. (225.8 cm)
Roll Bar - Up
71.4 in. (181.4 cm)
w/52" Deck
Drive wheels 39.7 in. (100.1 cm) 43.7 in. (111.0 cm)
Caster wheels 37.0 in. (93.9 cm)
w/52" Deck
1085 lbs. (492 kg)
- 13 -
deflector up
53.4 in. (135.6 cm)
61.4 in. (156.0 cm)
w/60" Deck
78.2 in. (198.7 cm)
88.9 in. (225.8 cm)
Roll Bar - Down
53.3 in. (135.4 cm)
w/60" Deck
39.0 in. (99.1 cm)
w/52" & 60" Decks
50.3 in. (127.8 cm)
w/60" Deck
1126 lbs. (511 kg)
deflector down
64.2 in. (163.1 cm)
72.2 in. (183.4 cm)
Torque