Recording Records To Cd; Recording Cassettes To Cd - Crosley Music Writer CR24-003A Instruction Manual

_CD Recording Operation
Preparation
This unit is designed to record CD-R and CD-RW
discs bearing the identification logo "Compact Disc
Recordable" or "CD-Rewritable". If CD's do not
conform to this standard, they may not record
properly.
1
Recording Records to CD -
Load a compatible blank CD-R or CD-RW into
the unit.
2
Press the FUNCTION button (2/68) to set the
unit to Phono mode.
3
Set the SPEED CONTROL SWITCH (32) to
the correct speed (33 1/3, 45 or 78 rpm) for
the selected record.
4
Use the CUE LEVER (30) to raise the tone
arm off its rest. Move the tone arm over the
record and use the cue lever to lower it to the
point you want the recording to start.
5
Press the CD RECORD button (7/55). "Record"
will show on the LCD. The CD will begin
recording.
6
Once the first side of the record is finished,
press the STOP button (12/53). The display
will read "CLOSE TK" while the content is
transferred to the CD. This may take several
minutes. Once finished, the display will read
"PHONO".
7
Turn the record over and repeat steps 4-6 to
record the other side.
8
After recording is completed, press the
STOP button (12/53). The display will read
"CLOSE TK" while the content is transferred
to the CD. This may take several minutes.
Once finished, the display will read "PHONO".
9
Once you have finished the recording, press
the FINALIZE (5/59) button. The display will
read "Finalize".
10
Once the CD has been finalized, the unit will
return to Phono mode and the display will show
"PHONO". The CD is now ready for use.
NOTE: If the CD is not finalized, it will not play in any
other CD player. Not all CD players are
compatible with CD-R and CD-RW's. Check
the owner's manual for other CD players for
compatibility.
Recording Cassettes to
1
Load a compatible blank CD-R or CD-RW into
the unit.
2
Press the FUNCTION button (2/68) to set the
unit to Phono mode.
3
Load a pre-recorded cassette tape into the
cassette player. Press to PLAY button(38) to get
the cassette to the point in which you want to
start the recording.
4
Once the cassette is ready and playing, press
the CD RECORD button (7/55) "Record" will
flash on the LCD. The CD will begin recording.
5
6
Once the first side of the cassette is finished,
press the STOP button (12/53). The display will
read "CLOSE TK" while the content is transferred
to the CD. This may take several minutes. Once
finished, the display will read "PHONO".
Eject the cassette tape and flip it over to the
other side.
7
Repeat steps 4 and 5 to record the other side
of the cassette.
8
After recording is completed, press the
STOP button (12/53). The display will read
"CLOSE TK" while the content is transferred to
the CD. This may take several minutes. Once
finished, the display will read "PHONO".
9
Once you have finished the recording, press the
FINALIZE (5/59) button. The display will read
"Finalize".
10Once
the CD has been finalized, the unit will
return to Phono mode and the display will show
"PHONO". The CD is now ready for use.
NOTE:If the CD is not finalized, it will not play in any
other CD player. Not all CD players are
compatible with CD-R and CD-RW.s. Check the
owner's manual for other CD players for
compatibility.
11