Page 1
CR703 The 5-In-1 Director Instruction Manual PO WE R www.crosleyradio.com...
Page 2
IMPORTANT SAFETY INSTRUCTION PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. . Retain instructions - The safety and operating instructions should be retained for future reference. 3.
Page 3
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:...
Welcome Table of Contents Thank you for purchasing The 5-In-1 Director Getting Started (CR703). Before operating this unit, please read this manual thoroughly and retain it for future reference. Control Locators....... 4,5 Unpacking......... 6 About This Manual Power Source......6 Headphones Jack Operation..
Control Locators Unit Controls Speaker Tuner Dial Dial Scale Pointer Disc Skip + Button PLAY/ DISC SKIP+ PAUSE STOP Disc Skip - Button F.SKI P REPEAT OPEN/ B.SKI P CLOSE Forward Skip Button CD PHONO TAPE RADIO SENSOR VOLUME TUNING POWER Backward Skip Button DOWN...
Page 6
Control Locators Unit Controls Spindle Turntable Adapter For 45 rpm Records Tone Arm Speed Control Switch Tone Arm Rest AC Power Cord FM Wire Antenna Line in ON / OFF Line in jack Remote Controls Open/Close Volume Down Disc 2 Disc 1 Disc Skip + Disc Skip -...
Getting Started Unpacking Power Source Remove packing materials from unit. Unwind the AC POWER CORD (36) at the back of the unit and connect it to a power outlet. Note: Save all packing materials. Plug A/C cord into appropriate outlet. Remove plastic bag covering radio.
Turntable Operation Turntable Operation Accessory: ADAPTER FOR 45 RPM Turn the unit on by pressing the POWER BUTTON To play the 45rpm record, place the ADAPTER (32) (13) located on the front panel. on the spindle. Slide the FUNCTION SWITCH (8) to the PHONO position.
Cassette & Radio Operation Radio Operation Cassette Operation Slide the FUNCTION SWITCH (8) to the TAPE Slide the FUNCTION SWITCH (8) to the Radio position. position. Insert a prerecorded tape through the CASSETTE Slide the AM/FM SWITCH (21) to the desired DOOR (29).Tape will slide into the cassette tuning band.
CD Operation Search Forward And Reverse During Play Playing A CD PLAYBACK Slide the FUNCTION SWITCH (8) to the CD position. Press and hold the FORWARD SKIP BUTTON (6/52) or the BACKWARD SKIP BUTTON (7/53) Press the OPEN/CLOSE BUTTON (22/40) to to search forward or backward through the open the CD DRAWER (14).
CD Operation Repeat Playback Disc Selection To repeat a single track, choose the track that Press DISC SKIP - (5/45) or DISC SKIP + (4/44) you want to repeat, then press the PLAY/PAUSE to select the desired disc, the DISC INDICATOR BUTTON (26/47) to start the track.
Connecting Optional Equipment Auxiliary Inputs You can connect external components to your unit by using the Auxiliary Inputs. Plug Auxiliary cables (not supplied) into the LINE IN JACK (39) on the back of your unit. Switch the LINE IN ON/OFF (38) to the ON position.
General Troubleshooting There is no Power Make sure the radio is plugged in correctly. Check to make sure the POWER BUTTON (13) is pushed in. There is no Sound Check the volume level by turning the volume knob(9). Turntable will not work Make sure the function switch is set to phono.
This warranty is not transferable. If the product is determined to be defective during the warranty period, the unit will be repaired or replaced at Crosley Radio’s sole discretion. This warranty covers manufacturing defects and normal consumer use and...